Experimental Facility
Experiment Facility Layout Status
Experiment Facility
Layout Status
The “Structural Materials Testing Building” and the “Construction Infrastructure Research Building” are located within approximately 100 meters of the Hybrid Structural Testing Center.
Experimental specimen fabrication and import/export
Experimental specimen
fabrication and
import/export
Full-scale test specimen fabrication and import/export possible (maximum length 80m)
Current Status of the Hybrid Structural Testing Center
Current Status of the
Hybrid Structural Testing Center
20MN UTM Experiment Building
Large-scale Structural Testing Building
20MN UTM Experiment Building
| Item | Facility size |
|---|---|
| Architectural Overview - Scale | 1st Floor |
| Building Area | 398m² |
| Strong Floor | Main Strong Floor: 5.5m(W) x 15.0m(L) |
| Crane | 200kN O.H.C 1EA |
| Main Entrance | 4.8m(W)×10m(H) |
Large-scale Structural Testing Building
| Item | Facility size |
|---|---|
| Architectural Overview - Scale | 1 basement floor, 3 Floors above Ground |
| Building Area | 1,678m² |
| Strong Floor | Main Strong Floor: 12.8m(W) x 48.9m(L) Outdoor Extended Strong Floor : 6m×6m×3ea |
| Strong Wall | Solid type [24+8]m(L)×[12+9+6]m(H) Multi-direction System |
| Crane | 300+100kN O.H.C 1EA 300kN O.H.C 1EA |
| Main Entrance | 10m(W)×12m(H) |
Strong Floor / Strong Wall
Strong Floor
Strong Wall
· Design strength of reaction frames/reaction walls: 5,000 kN/m²
· Hole spacing of reaction frames/reaction walls: 500 mm
· Structural testing of specimens up to 12 m in height is possible
· Structural testing of specimens up to 80 m in length is possible
· 3-axis 6-degrees-of-freedom structural testing is possible
· Real-time hybrid structural testing is possible
